Ruris DAC 110XL, Руководство пользователя

Страница: 94 / 172

EN
18
The Machine
does not cut
the lawn ○ engine speed too low
○ Wet
○ Lawn too high
○ Damaged knife (unsharp) ○ Adjust the Machineburetor or the
lever of the controller (service).
○ Do not cut the lawn when wet, wait
until it dries.
○ Cut once high then cut again to the
desired height
○ Sharpen or replace the knife
Unmatched
cut ○ Wheels not well positioned
○ Used knife ○ Place all wheels in the same
position
○ Sharpen or replace the knife
NOTE: For repairs outside the above adjustments, contact the nearest RURIS authorized
service
11. STORAGE
The next steps should be followed to prepare the lawn mower for storage.
⚫
Clean and lubricate the machine carefully after the description in the instruction
manual.
⚫
Wrap the Machine knife with Vaseline to prevent rust.
⚫
Store the Machine in a dry, clean area. Do not store it next to corrosive material or
heating sources (central, stoves).
⚫
Empty the fuel from the tank.
⚫
Turn on the machine and let it run until the Machineburetor fuel is consumed and
stopped.