13
9.
If you want the camera to take pictures when specific IO events are triggered, click the
Capture by events
button to open the
Camera A event settings
or
Camera B event
settings
window.
10.
Select the required events by ticking the checkboxes. Click
Save
.
11.
If you have two connected cameras, repeat steps 2-10.
Make sure that the events are enabled and properly configured in the active profile. Events
that are not enabled/configured will be marked in red, and trying to select them will cause
a pop-up warning message to appear.
The following table shows the IO events, which must be configured to inform the server how many
pictures were taken since the last record and are stored in the SD card:
Event name
Monitoring
On Change
On Hystersis
PortA camera snapshot on SD card
+
+
+
PortB camera snapshot on SD card
+
+
+
