RUPTELA FM-Pro3, Руководство пользователя

Страница: 4 / 18

4
Use cables provided with FM-Pro3 device.
Ruptela is not responsible for any harm caused by using wrong cables
for PC <-> FM-Pro3 connection.
Attention! Do not connect wrongly the wires marked (+ battery) and
(chassis) to battery poles. If poles are mixed, the device will broke.
To disconnect the device from power supply, you need to disconnect
10 pins plug and plug for internal battery.
This chapter contains information on how to operate FM-Pro3 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device! The Terminal is
supplied from a car battery with its ratings: 12/24V
1A/500mA. The allowed voltage range
for battery: 10…32V DC.
To avoid mechanical damage, it is advised to transport the Terminal FM-Pro3 in an impact-
proof package.
Before connecting the wires of 12 pins plug to the vehicle, ensure that 10 pins plug is
disconnected from the Terminal. Be sure that cross-
sectional area of mounting wires is at
least 0.75 mm
2
.
To dismount Terminal correctly from the vehicle, first of all disconnect 10 pins plug and only
then other plugs or interfaces can be disconnected.
Always connect 12 pins plug before connecting 10 pins plug.
The Terminal is intended to be installed in a restricted access location, which is inaccessible
for the operator. The Terminal FM-Pro3 is not intended to be used for boats.