RUPTELA FM-Pro3, Руководство пользователя

Страница: 3 / 18

3
1. INTRODUCTION
1.1. SAFETY REQUIREMENTS
All the associated (additional) equipments as PC, batteries, sensors
and others, shall meet the requirements of standard EN60950-1.
Do not disassemble the Terminal. If the enclosure of Terminal is
damaged, or the insulation of wires is damaged, first of all unplug the
10 pins connector from the Terminal carefully .
All the wireless data transferring equipments produce interference that
may affect other devices which are placed nearby.
The Terminal can be installed or dismounted only by qualified
personnel!
The Terminal must be firmly fastened in the predefined location.
Predefined location is explained in the Mounting instructions.
The programming must be performed using a 2nd safety class of PCs
(with autonomic power supply).
Be sure the Terminal is installed in the place where it cannot be
reached by water drops and humidity.
Caution
! !! !
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Any installation and/or handling during a lightning storm is prohibited.