Rupert Neve Designs 5060 CENTERPIECE Скачать руководство пользователя страница 18

5060 Manual P/N 775-00019 Rev A

Rupert Neve Designs

PO Box 1969
Wimberley TX 78676
www.rupertneve.com
tel: +1 512-847-3013   
 fax: +1 512-847-8869

Product Warranty

Rupert Neve Designs warrants this product to be free from defects in materials and 
workmanship for a period of one (1) year from date of purchase, and agrees to remedy 
any defect identified within such one year period by, at our option, repairing or replacing 
the product. 

LIMITATIONS AND EXCLUSIONS 

This warranty, and any other express or implied warranty, does not apply to any product 
which has been improperly installed, subjected to usage for which the product was not 
designed, misused or abused, damaged during shipping, damaged by any dry cell battery, 
or which has been altered or modified in any way.  This warranty is extended to the 
original end user purchaser only.  A purchase receipt or other satisfactory proof of date of 
original purchase is required before any warranty service will be performed.  THIS 
EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, 
EXPRESS OR IMPLIED, TO THE EXTENT ALLOWED UNDER APPLICABLE 
STATE LAW.  IN NO EVENT SHALL RUPERT NEVE DESIGNS BE LIABLE FOR 
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING 
FROM THE USE OF THIS PRODUCT.  Some states do not allow the exclusion or 
limitation of consequential damages or limitations on how long an implied warranty lasts, 
so this exclusion may not apply to you. 

WARRANTY SERVICE 

If you suspect a defect in this product, please call us at 512-847-3013 or email us at 
[email protected] to discuss the suggested defect (it is possible that a suspected 
defect could be due to improper usage) and to obtain a return authorization number.  It 
shall be your responsibility to pay for shipping the product to us, and, if the product is 
determined to be defective, our responsibility to pay for shipping the product back to you.

Содержание 5060 CENTERPIECE



















Отзывы: