Page
8
of
12
To ensure good contact with your skin you will need
to moisten the contacts of the sensor or apply an
ECG gel (available from health stores).
Switching
between
coded
and
uncoded
transmission
16 coded and one uncoded channel can be selected.
Pressing the button on the front of the chest strap
switches between the coded channels. If you press
and hold the button for 5 seconds, it will
automatically switch to the uncoded channel.
Pressing the button again will switch back to the
encoded channels.
iPhone:
Go to "
Settings
" and select “
Heart Rate Settings
”,
and on the bottom of the screen you can see on
which channel the chest strap is sending. Should
you wish to change the channel, press the button
on the chest strap as described above to switch to
the next coded channel, and then press the button
“
Re-Pair
”
and your smartphone will establish a
connection to the chest strap again.
Android operating systems:
Go to "
Settings
" and select "
Heart Rate Settings
",
under point
"Sensor channel"
you can see on which
channel the chest strap is sending. If it is using a
coded channel, it shows a digit. If it uses the
uncoded channel, it reads
“uncoded”
. Should you
wish to change the channel, you have to disconnect
the chest strap from the receiver by switching to
“No pulse connection”.
Now switch the channel as
described above by pressing the button on the
