Page
6
of
12
NOTE:
1.
Should there be no heart rate reading, it might
be that the contacts for the receiver in your
smartphone are poled different. In this case
open the case of the receiver (as described in
point „Changing the battery for the receiver“)
and change the position of the switch in the
case. Reattach the cover of the receiver and
repeat the activation process of the heart rate
measurement as described in point 3.
„Activating heart rate measurement“. If there
is unstable heart rate reading, please contact
following e-mail address:
[email protected]
2.
The function of the microphone and the
loudspeaker will be disabled when the
receiver is plugged in the phone, it is however
possible to use a headset.
3.
The remote control of the iPhone earphone is
not working when the receiver is plugged in
the phone
4.
The receiver will be turned on and consume
battery when it is plugged in the phone even
the runtastic app is not activated. Please take
off the receiver when it is not in use.
5.
The battery life of the receiver is around 2.5
years if it is used 1 hour per day. Please
change the battery life when it is out of
battery and cannot receive signal from the
chest strap.
3. Activating heart rate measurement
To activate the heart rate measurement function
open the runtastic app on your smartphone.
iPhone:
Go to "
Settings
" and select “
Heart Rate Settings
”
.
Select the option “
runtastic Receiver with Chest
