RUNOW 6310CB, Руководство пользователя

Страница: 21 / 31

17
6) INTERVAL10/20:

Press” INTERVAL10/20” button ,enter to this mode , LCD will display ICON ,
with buzzer beeps 0.5s.

If there is no signal input for more than 30 seconds during manual setup, the computer
will return to standby mode.

The “READY” ICON counts down from 3s to 0s , meanwhile with a short buzzer beep
(FIG 7) , LCD display ”01/XX”(“01”is flashing) . The “WORK” ICON is flashing one time
every 1s with buzzer sounds( shining 0.75s/ put out 0.25s) ,”TIME”ICON counts down
from 10s to 0s, DISTANCE
、
CALORIES
、
WATTS
、
SPEED
、
RPM count up according to
the operation.(FIG 8)
..
(FIG 7) (FIG 8)

After working for 10s, LCD window will display ”01/08”(“01”is flashing), “REST” ICON
keeps flashing , the buzzer rings for 0.25s per 1s, time will starts to count down from 20s
to 0s.

Work & REST display in cycle, cycle count increase 1 every time till it reaches to
08/08(total cycle counts 8 times). Buzzer rings 0.5s and enter to stop mode.(The
average value of the sports results is only calculated within the Work Time)

When the last REST is reached, this mode is stop directly.

If no signal input in 5Min, buzzer rings 0.5s and then enters into standby mode.

Press the "START" key once to enter the interrupt mode, and press “START” to continue
running.

Press the “STOP” button to ring the buzzer for 0.5s and enter into the stop mode.