Runco Video Xtreme VX-2c Скачать руководство пользователя страница 3

Runco VX-2c/VX-2dc Owner’s Operating Manual

iii 

PRE

L

IMINAR

Y

TWO YEAR LIMITED WARRANTY

For Projectors, Video Processors and Controllers

Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces 
“The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of 
unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your 
other important documents. 

SERVICE LABOR: Runco will pay for service labor by Runco Authorized Service Center when needed as a result of 
manufacturing defect for a period of two (2) years from the effective date of delivery to the end user (excluding the lamp).

PARTS: (Not including the lamp) Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in 
materials or workmanship for a period of two (2) years from the effective date of delivery to the end user. Such replacement 
parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

PROJECTOR LAMP: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a 
manufacturing defect for a period of six (6) months or 1000 hours, which ever comes first, from the effective date of delivery to 
the end user. In addition, Runco will provide a new or rebuilt replacement lamp for the lamp that fails due to defects in materials 
or workmanship for a period of six (6) months or 1000 hours, which ever comes first, from the effective date of delivery to the 
end user. Such replacement lamps are then subsequently warranted for the remaining portion (if any) of the original warranty 
period.

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does 
not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from 
accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper 
maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and 
brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote 
control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this 
Limited Warranty.

CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED 
DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED 
WARRANTY. MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP 
IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY.

Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There 
are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to 
the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and 
some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or 
exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from 
state to state.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

RIGHTS, LIMITS AND EXCLUSIONS:

Содержание Video Xtreme VX-2c





















































































Отзывы: