Runco Video Xtreme VX-2c, Руководство по эксплуатации для владельца

Страница: 13 / 84

Runco VX-2c/VX-2dc Owner’s Operating Manual 1
PRE
L
IMINAR
Y
1.1
About This Manual This Owner’s Manual describes how to install, set up and operate the Runco VX-2c or
VX-2dc DLP Projector and DHD Controller. It describes the features and functions
available with DHD Controller Software version 2.0 and later.
Throughout this manual, the Runco VX-2c or VX-2dc DLP Projector and DHD Controller
are referred to collectively as the “VX-2.” The information in this manual applies to both
projectors except where otherwise indicated.
Target Audience Runco has prepared this manual to help home theater installers and end users get the
most out of the VX-2.
Runco has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Runco product manuals on-line, at www.runco.com.
If You Have Comments
About This Manual... Runco welcomes your comments about this manual. Send them to techpub@runco.com.
Textual and Graphic
Conventions Text Conventions: The following conventions are used in this manual, in order to clarify
the information and instructions provided:
• Remote and built-in keypad button identifiers are set in upper-case bold type; for
example, “Press EXIT to return to the previous menu.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc>
and <Tab> .
• <Enter> indicates that you may press either the RETURN or ENTER key on your
keyboard if it has both keys.
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, type
LETTERBOX <Enter>
.”
In addition to these conventions, underlining, boldface and/or italics are occasionally used
to highlight important information, as in this example:
1. Introduction
A carriage return
must
be used after each command or string.
Note