Runco Reflection CL-810 / SDC-1, Руководство по эксплуатации для владельца

Страница: 65 / 92

Operation
Runco CL-810 Series Owner’s Operating Manual 53
PRE
L
IMINAR
Y
Color Temperature: The CL-810 has six memory settings for Color Temperature. Four
of these settings are factory set to default as follows:
• 0 -- Original lamp color temperature
• 1 -- 5400 kelvins
• 2 -- 6500 kelvins
• 3 -- 8500 kelvins
• 4 -- Custom
• 5 -- Custom
Custom 4 and 5 memory are installer-adjustable and can be used to create custom
settings. There are nine adjustable “white balance” parameters available for the Custom 4
and 5 settings (three each for red, green and blue). These are described later in this
section; refer to
Set Up on page 58.
ICC S election: Use the ICC Selection menu to select the color space that is appropriate
for the source signal, to achieve optimal color balance.
If you select NTSC, HDTV or PAL, you can make further adjustments to individual color
space characteristics in the ICC Adjust sub-menu under the ISF Calibration menu,
described later in this section. (The Standard color space is factory-set and not
adjustable.)
S tore Image S etting s : Once the desired adjustments have been entered, select Store
Image Settings to save these settings into the “Memory 1” memory location.
Re s tore Image S etting s : To recall stored custom image quality settings, select Restore
Image Settings and choose “Memory 1,” “ISF Night” or “ISF Day.”
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press
ENTER . Select the appropriate aspect ratio for your
screen size and the type of program material being viewed; refer to Table 4-1.
Color Temperature
2 - +
You must enter a passcode in order to enter the Set Up menu.
The International Color Consortium (ICC) is a group of imaging
product vendors that promotes and develops cross-platform,
vendor-neutral color measurement and management standards.
Note
Note
A s pect Ratio
Anamorphic (16:9)
S tandard (4:3)
Letterbox
Virtual Wide
Cinema
Virtual Cinema
When you change the aspect ratio, save the change to a preset
afterwards. Otherwise, the change will be lost when a different
input is selected. (The aspect ratio is saved for each input and
resolution separately.)
Note