Runco PlasmaWall PL-50XA, Руководство по эксплуатации для владельца

Страница: 48 / 72

Operation
38 Runco PlasmaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
Color Saturation: On your external test pattern source, select a color bar pattern like the
one shown in Figure 4-5.
Figure 4-5. Typical Color Bar Pattern for Adjusting Color Saturation and Tint
Select Color and press ENTER . While looking at the color bar pattern through a blue filter,
adjust the color saturation level until the outermost (gray and blue) color bars appear to be
a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image
appears greener. To set the tint, select Tint and press
ENTER . While looking at the color
bar pattern through a blue filter, adjust the tint level until the cyan and magenta color bars
(on either side of the green bar) appear to be a single shade of blue.
Like the brightness and contrast controls, the color and tint controls
are interactive. A change to one may require a subtle change to the
other in order to achieve the optimum setting.
gray
yellow
cyan
gr
een
magenta
re
d
blue
gray
yellow
cyan
gr
een
magenta
re
d
blue
Note