Runco LIGHTSTYLE LS-HB, Руководство по установке и эксплуатации, Страница: 61 / 112

Installation
Runco LS-HB/LS-HB Ultra Installation/Operation Manual 45
PRE
L
IMINAR
Y
4. Then, adjust the anamorphic lens angle so that the projected image is rectangular:
The anamorphic lens will almost always be angled with respect to the projector; this is
normal.
5. When the height and angle are properly set, tighten the Height/Pitch Adjustment
Screws to secure the lens in place.
Movable Anamorphic
Lens Attach the movable anamorphic lens to the bracket using the plastic knobs supplied with
the lens. See Figure 3-17.
Figure 3-17. Attaching the Anamorphic Len s to the Len s Mount
There may be some pincushion distortion even after the lens is
properly adjusted, especially at shorter throw distances. If this is the
case, Runco recommends that you slightly over-scan the image into
the screen frame area to mask the distortion.
Correct Lens Angle
Incorrect Lens Angle
Note