Runco DTV-940, Руководство по эксплуатации для владельца

Страница: 11 / 73

2-1
LOCATION AND FUNCTION OF CONTROLS
RS 232 Input Port
Connection between the projector and an IBM PC (or compatible)
or MAC (RS422) for remote computer control and data communi-
cation. Also used with automation devices, such as Phast, AMX,
Creston, etc.
RS 232 Output Port
RS 232 Input Port allows a communication link for PC or MAC to
the next projector in a series of projectors.
IR Sensor
Receiver for control signals transmitted from the RCU.
Communication Port -not used.
IR Remote
Connector for remote input for hard wired remote control
RGB-S or Component Input (4x BNC connector):
RGB-S input: allows a microcomputer, video camera, etc. having
analog RGB output to be connected to the projector.
Line inputs: -signals RED-GREEN-BLUE
-COMPOSITE sync.signal
(R-Y)Y(B-Y)-S Input (component input): allows to connect e.g. a
DTV Decoder having component outputs to the projector.
Line inputs -signals RED-LUMA, LUMA, BLUE-LUMA
-COMPOSITE sync. signal
1
2
3
4
5
6
VIDEO Input (Composite video, 1x BNC connector):
Allows a video tape recorder, video camera, color receiv-
er/monitor, etc. having video line output to be connected
to the projector.
S-VIDEO Input: Separated Y/C (luma-chroma) signal
inputs and outputs for higher quality playback of DVD
signals (4-pin S-VIDEO connector loop-through).
7
8