TROUBLE SHOOTING & SAFETY
ORDERING REPLACEMENT PARTS
Charger Power
Adaptor
Strainer
Battery Charger
Base
Battery Cartridge
Please visit
for a list of stores
carrying our replacement parts and have the part
number ready when ordering.
PUMP IS NOT PUMPING
Part # R-2001
Part # R-2002
Part # R-2004
Part # R-2005
IF YOU NEED ANY REPLACEMENTS PARTS
5
6
- Check to make sure the on/off knob is turned furthest to
the right.
- Verify battery is charged by placing battery in charger
and making sure light is green.
- Check the hose for any kinks.
- Check pump strainer for debris.
See strainer removal instructions on page 3.
- Verify the pump is in at least ¾” of water. If the pump is
in less than ¾” of water, the pump may not be able to
pick up the water.
BATTERY NOT CHARGING
- Check power connection on wall.
- Check to make sure the power cord is fully inserted into
the back of the charger.
- Make sure the battery cartridge is fully seated in the
charger base in the correct orientation and the charge
light is on.
- Verify charger is in good working condition.
- Depending on the age, usage rate and the environment
where the battery cartridge has been stored, the battery
may need to be replaced.
SAFETY PRECAUTIONS
- Do not place wet battery cartridge in charging base.
- The pump is NOT designed for drinking water.
- Ensure battery and pump are dry before inserting
cartridge into pump.
- THIS PUMP IS FOR WATER ONLY
DO NOT PUMP FLAMMABLE LIQUIDS
DO NOT PUMP CORROSIVE LIQUIDS
DO NOT PUMP GASOLINE/DIESEL/PETROL
- Do not insert battery into the pump or insert the battery
into the charger where flammable vapors are present.
A small spark may occur and ignite any surrounding
flammable liquid, possibly damaging the surrounding
environment and presenting a health risk.
