Hardware Installation and Reference Guide
Product Installation
- 19 -
If the screws cannot be tightened, it is probably because the fan module is not fully inserted. Please check it
carefully.
Power modules and fan modules with different air direction cannot be used together.
Removing a Fan Module
1.
Loosen the captive screws of the fan module with a screwdriver.
2.
Hold the handle at the end of the fan module, and withdraw the fan module slowly.
3.
Install the fan filler panel and put the removed fan module into its package
Figure 3-4 Removing a Fan Module
Withdraw the fan module slowly.
Install a filler panel on the location where a fan module is removed to ensure normal ventilation and dissipation
and avoid dust in the chassis.
3.6 Installing and Removing a Power Module
Wear anti-static gloves before the following operations.
Installing a Power Module
1.
Take a new power module out of the package and confirm the input mode and the input parameters of the power
module match the requirements.
2.
Remove the power filler panel and take the plane printed with power information as the top panel of the power
module. Hold the handle of the power module with one hand, and hold the end of the power module with the other
hand. Insert it into the chassis along the guide rail slowly until a click is heard, and make sure that it is in good
contact with the power slot.
Figure 3-5 Installing a Power Module
