Ruijie RG-S6120 Series Скачать руководство пользователя страница 6

Страница: 6 / 68

Ruijie RG-S6120 Series Switches Hardware Installation and Reference Guide

Weight

(With two fans and

Without the power

module)

8 kg (17.64 lbs, with four fan modules and two power modules)

Dimensions

(W x D x H)

442 mm x 387 mm x 44 mm (17.40 in. x 15.24 in. x 1.73 in.), 1RU

The RG-S6120-48XS8CQ switch is a class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

The 10G Ethernet port of the RG-S6120-48XS8CQ switch supports DAC. For a detailed model and specification,

refer to Appendix B.

Appearance

The RG-

S6120-48XS8CQ

switch

includes the chassis, the power system and the heat dissipation system.



The power supply system: Provides two power supply slots, which support 1+1 power supply redundancy. It is

recommended to configure power supply redundancy.



The heat dissipation system: Provides four fan module slots, which support 3+1 fan redundancy. It is

recommended to configure fan redundancy.

Figure 1-1 Appearance of RG-S6120-48XS8CQ

Front Panel

Figure 1-2 Front Panel of RG-S6120-48XS8CQ

Содержание RG-S6120 Series





































































Результаты поиска

Содержание RG-S6120 Series

Отзывы:

Похожие инструкции для RG-S6120 Series

Бренды по названию

Популярные бренды

Ruijie RG-S6120 Series, Руководство по установке и справочное руководство по оборудованию

Результаты поиска

Содержание RG-S6120 Series

Отзывы:

Похожие инструкции для RG-S6120 Series

Бренды по названию

Популярные бренды