Ruijie RG-S6120 Series Switches Hardware Installation and Reference Guide
Insert the power module smoothly. Please pay attention to the direction of the power panel to avoid wrong
insertion.
If it is difficult or even impossible to insert the module, pull out the module, make sure the power module and guide
rail are well aligned, and then insert the module again.
Power modules and fan modules with different air flow direction cannot be used together.
Installing Power Cord Retainer
1)
Power cord retainer includes a strap and a ring. One side of the strap is smooth and the other side is grooved. The
ring has two buckles. Buckle A is used to remove the strap and buckle B is used to adjust the ring.
Figure 3-1 Strap, Ring and Buckles
2)
Insert the strap into the hole at the bottom of the ring and lock it into place. If you want to remove the strap, press
buckle A and pull the strap out.
Figure 3-2 Installing Strap
1)
Check whether the power cord container is correctly installed. If you can remove the strap without pressing buckle
A, the strap may be installed incorrectly. Try the other side of the strap.
2)
Attach the power cord container to the installation hole of the power module.
3)
Plug the power cord into the connector. Pass the power cord through the strap and adjust the ring by pressing
buckle B until the power cord is fastened.
