At present, the redundant power supply interface can be used together with the
RPS150, RPS500, and RPS1100
that are manufactured by Ruijie Networks. Unless otherwise stated, other power supply modules cannot be used for
power input; otherwise, an abnormality may occur on the switch or the switch may become damaged.
Heat Dissipation System
The RG-S3760E-48P adopts turbine fans for heat dissipation purposes, thereby ensuring the device to function
normally in the specified environment. 10cm distance space should be reserved at both sides and the backplane of
the cabinet to allow air circulation. Figure 1-22 shows the flow scheme of heat dissipation.
A
ir
in
ta
k
e
A
ir
in
ta
k
e
Figure 1-22 Flow scheme of heat dissipation
1.4 LED Indicators
Table 1-4 Indicators for the RG-S3760E-24/RG-S3760E-24-DC/RG-S3760E-24P
Indicator
Panel Identification
Status
Meaning
POE indicator
(only for the
S3760E-24P)
POE
Solid green
The port indicator indicates the switching state.
Solid yellow
The port indicator indicates the POE power
supply state.
Link indicator
Status
Off
The switch is not powered on.
Blinking green
The switch is being initialized. If the blinking
persists, however, it indicates that an
abnormality occurs.
Solid green
Normal switching is performed by the switch.
Solid yellow
It indicates a yellow warning on the switch
temperature. Check in time the working
environment of the switch.
Solid red
Indicates a fault on the switch. For details, refer
to Section 5.2 Troubleshooting Common Faults.
Extension module
indicator
Module
Off
There is no extension module or the extension
module is not correctly installed.
Solid green
The extension module is correctly installed.
Extension module
A/B
Off
The port is not connected to a link.