Ruijie RG-RSR20-X-28 Series, Руководство по установке и справочное руководство по оборудованию

Страница: 36 / 55

Figure 3-3 Step 2-Mouting the Router on a Rack
The figure is only for reference, and the specific object prevails.
3.2.2 Mounting on the Workbench
In actual application, the standard 19-inch cabinet may be unavailable. In this case, the router is often mounted on a
clean workbench. The operation is easy and the requirements are as follows:

The workbench is stable and is properly grounded.

The supplied plastic cushion is stuck to the small hole at the bottom of the router and a space of 10 cm is set
aside around the router for dissipation.

No weight is placed on the top of the router.
3.3 Installing the Grounding Cable and the Power Cable
Ruijie RSR20-X-28 series routers support the following AC power supply:
AC: 100
–240 VAC; 50 Hz to 60 Hz;
Verify that the power supply meets the requirement.
3.3.1 Installing the Grounding Cable
The router power cable is composed of three wires. You are recommended use a single-phase power socket with a
natural connector or a multifunctional PC power socket. The neutral point of the power supply should be reliably