Ruijie RG-RSR20-X-28 Series, Руководство по установке и справочное руководство по оборудованию

Страница: 21 / 55

Figure 1-15 HSIC-2E1-CE1
Each module has an interface status indicator ( Link/ACT indicator) and the module RDY indicator. And an OFL hot
swapping button is provided.
The following table describes LED indicators.
Table 1-17 LED Indicators on the SIC-1E1-F Module
LED Panel Identification State Meaning
Module status LED RDY
Off
The module is not receiving power; the module is
not properly inserted; or the module is removable.
Blinking green Initialization in progress
Solid green
Initialization is complete and the module is
operational.
Port 0-1 status LED Link/ACT
Off The port is not connected.
Blinking green
The port is connected properly and is
transceiving data.
Solid green The port is properly connected.
Hot Swapping Button OFL -
Press the button for more than 3s. When the RDY
indicator starts to blink, release the button, and
the automatic unmounting of the module is
complete. After the RDY indicator turns off,
remove the module.
Features
The following table describes the basic features.
Table 1-18 Specifications of the HSIC-2E1/CE1 Module
Number of Ports Two
Interface Type DB9 female connector
Cables Balanced cables or non-balanced cables
Standard Compliance ITU-T G.703