Installing Outdoor Antennas (Optional)
Outdoor antennas fall into directional and omni-directional antennas.
for special
The integrated RG-AP630 antenna meets the demands in most cases. To obtain external antennas
occasions, go to http://www.ruijie.com.cn/.
Installing Outdoor Directional Antennas
To protect your outdoor directional antennas from lightning strikes, install a lightning rod on top of the pole.
block. Make sure the pole is exactly vertical
nless steel (40 mm x 4 mm).
ets. See Figure 3-12.
When installing the pole on the roof, install the pole on a wall or concrete
to ground.
To ground the antenna pole, connect the pole to a ground grid with a stai
Install the outdoor directional antenna to the pole with the supplied brack
Figure 3-18 Mounting the Outdoor Directional Antenna on the Pole
Installing O
y metal. Therefore, do not weld the lightning
tenna. Place the lightning rod in the middle of two
omni-directional antennas. See Figure 3-13.
When installing the antenna on the pole, make sure the top and bottom pole clamps are level to the ground and
parallel to each other.
utdoor Omni-directional Antennas
Omni-directional antennas must be kept at least one meter away from an
rod on the pole installed with an omni-directional an