Connecting the network cable
Waterproof material is customer-supplied.
1) Trim the network cable according to the
2) Thread the cable through liquid-tight ad
distance between the AP and the power supply.
apter and add a plug to the end. See figure 3-16.
Figure 3-12 Threading the Network Cable
yers of liquid-tight material. See figure 3-17.
3) Wrap the cable between B and C up with two or three la
Figure 3-13 Wrapping liquid-tight Material around Cable
In
4)
PoE IN port and tighten B, C and D in order.
sert the plug into the
Make sure the plug is correctly inserted. The plug gets damaged when the liquid-tight adapter is wrenched
improperly.
t adapter first and then the plug.
Before removing the network cable, dismantle the liquid-tigh