Hardware Installation and Reference Guide
Product Overview
4
Table 1-3
LED Specifications
No.
LED
Status
Description
1
MESH LED
(White)
Off
1. Mesh pairing is not implemented.
2. Wireless relay is not set up.
Flashing
alternately
Mesh pairing is in progress.
Three bars on
1. The Mesh signal strength is high.
2. The wireless relay signal strength is high.
Two bars on
1. The Mesh signal strength is medium.
2. The wireless relay signal strength is
medium.
One bar on
1. The Mesh signal strength is low.
2. The wireless relay signal strength is low.
2
SYS LED
(Blue)
Flashing
Fast flashing (at 8 Hz): The router is
starting up.
Slow flashing (at 0.5 Hz): The network is
unreachable.
One long flash followed by three short
flashes (at 0.8 Hz): The router is faulty.
Flashing twice in succession (at 0.8 Hz):
1. The router is restoring factory settings.
2. The router is upgrading the software.
Note: Do not power off the router in this case.
Solid on
The router is functioning properly.
Off
The router is not powered on.
1.2.3
Power Supply
The RG-EG105GW(T) router adopts the power adapter (12 V/1.5 A) delivered with the device.
1.3
Technical Specifications
Table 1-4
Technical Specifications
RF Design
Dual-stream and dual-radio
Transport Protocols
Compliant with 802.11ac wave2/wave1 and 802.11a/b/g/n simultaneously.
