RG-S7800C Switch Quick Installation Guide, V1.2
Preparations Before Installation
4
3.2 Installation Site
RG-S7800C series must be used in the room. To ensure normal operation and a prolonged use life of the device, the installation site
must meet the requirements of weight capacity, humidity , cleanness, EMI consideration, grounding system, power, and ventilation.
See the
Preparation before Installation
chapter of
RG-S7800C Series Switches Hardware Installation and Reference Guide
for details.
3.3 Cabinet Mounting
Make sure the cabinet complies with the following conditions:
Install the switch in a 19-inch cabinet in 4-port form hold.
Be sure the distance between two square hole strips, one on each side, is 465 mm.
Figure 3-3 19-inch Cabinet
Be sure that the square hold strip is at least 125 mm far from the outboard front door and the door is at most 25 mm thick to
ensure a minimum available distance of 100 mm. The front door is at least 500 mm far from the back door,
Figure 3-4 Cabinet Dimensions
