does not support RPS and has no RPS indicator.)
7. PoE/switching mode switchover button (By
default, the indicator shows the switching status.
Press this button to switch to the PoE mode and
press again to back to the switching mode)
13. 10/100/1000Base-T adaptive Ethernet port
indicator
14. 100/1000Base-X SFP port indicator
Back Panel
Figure 1-10 Back Panel of the RG-S2628G-P Switch
Note:
1. Grounding pole
2. RPS power interface (RG-S2628G-P V1.2X does not
support RPS and has no RPS power interface.)
3-core AC power interface
4. Cable plug retention clip
5. Fan outlet
6. Extension module slot
Power Supply System
RG-S2628G-P adopts the AC power input and redundant power input.
AC
input:
Rated voltage range: 100–240 VAC
Maximum voltage range: 90–264 VAC
Frequency: 50–60 Hz
Rated current: 6 A
Power cable requirement: 10 A power cable
Redundant power input: The switch power can be supplied by the redundant power input or both the AC input and
redundant power input. When both the AC input and the redundant power input are available, the switch power is
supplied by the AC power input; when the AC input is unavailable, the switch power supply switches to the
redundant power input seamlessly.
RG-S2628G-P V1.2X does not support RPS or redundant power input.
At present, the redundant power supply interface can be used together with the RPS150, RPS500, and
RPS1100
that are manufactured by Ruijie Networks. Unless otherwise stated, other power supply modules cannot
be used for power input; otherwise, an abnormality may occur on the switch or the switch may become damaged.
Heat Dissipation System
