4-6
Ruijie RG-MTFI Implementation Cookbook (V1.0)
Quick Start
Caution:
Before installing the mounting bracket, attach the two rubber dampers in the accessories to the rear of RG-MTFi-M520.
Match the screws with screw holes, so as to fasten all components.
Fasten all screws to prevent RG-MTFi-M520 from vibrating or falling off.
Remarks:
1.
For RG-MTFi-M520 with a single 3G/4G module, insert the SIM card into SIM Card-1 slot with adapter. For
RG-MTFi-M520 with dual 3G/4G modules, insert the SIM cards into SIM Card-1 slot and SIM Card-2 slot with adapters.
2.
To prevent SIM card from missing, fasten the anti-theft panel to the front panel using four M3 hexagon socket-head
screws after the SIM card is inserted.
3.
The following figure shows appearance of the anti-theft panel
Figure 4-2 Anti-theft Panel
4.1.2 Installing the Antenna
Screw the antennas delivered with RG-MTFi-M520 into corresponding antenna connectors on the rear panel, and make sure
that the antennas are fastened. The antennas are provided with 3M adhesive, and may be attached near the window.
4.1.3 Installing the Power Cable
Connect the DC aviation plug to RG-MTFi-M520 properly, and fasten the aviation plug by rotating the nut.
Figure 4-3 Connecting the DC Aviation Plug to RG-MTFi-M520
Left: DC aviation plug Right: Aviation plug on RG-MTFi-M520
