Ruijie Networks RG-AP520-I(G2) Series, Руководство по установке и справочное руководство по оборудованию, Страница: 23 / 31

·
Chapter 4 System Debugging
Setting up a Debugging Environment
Use a power adapter or PoE to power the AP.
Setting up the Environment

Verify that the AP is properly connected to the power source.

Connect the AP to an AC through a twisted pair cable.

When the AP is connected to a PC for debugging, verify that the PC and PoE switch are properly grounded.
Powering up the AP
Checking before power-up

Verify that the power supply is properly connected.

Verify that the input voltage matches the specification of the AP.
Checking after power-up (recommended)
After powering up, it is recommended that you check the following to ensure normal operation of the AP.

Check if any message is printed on the Web-based configuration interface of the AC.

Check if the LED works normally.