Ruijie Networks RG-AP520-I(G2) Series, Руководство по установке и справочное руководство по оборудованию, Страница: 16 / 31

·

Disconnect the device before cleaning it.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the AP is working.

Fasten the device tightly.
Installing the Access Point

Ceiling Mount
1) Drill four 6 mm diameter holes (61 mm apart) on the ceiling. Tap wall anchors into the holes, and drive screws
through the mounting bracket into the anchors to fix the bracket. See Figure 3-1.
Figure 3-1 Attaching the Mounting Bracket on the Ceiling
2) Align the square feet on the rear of the AP over the mounting holes on the bracket. See Figure 3-2.
Figure 3-2 Aligning the Square Feet with the Mounting Holes
Before mounting the AP on the bracket, you must first install the Ethernet cables.
3) Slide the AP into the holes until it clicks into place. See Figure 3-3.
Figure 3-3 Mounting the AP on the Bracket