Tumbler MPR 300
5
[The information on the proposed personal protective equip-
ment has only an advisory function. A full risk assessment
should be carried out before using the product to assess
whether the indicated personal protective equipment is
suitable for local conditions. Personal protective equipment
should conform to the relevant EU standards.]
!!! The operator must operate the machine according to the intended
use and strictly observe all points listed in the "Operation" work in-
structions prepared by the supervisor.
!!! Before putting the machine into operation for the first time and on
each working day, the operator must check the functionality of the
following safety devices:
a)
Visual check for changes or damages on all machine sides
and accessible machine parts, e.g. tumbling arm; lifting aid.
The machine must be shut down in the event of any damage
or changes!
b)
Check the safety switch on the lid drive; to this end:
- Turn the manual switch control until the lid has reached the
end position "Open" and then turn for a further 5 seconds.
The lid must remain still and there must be no error message
displayed.
-
Afterwards, “Close lid” and proceed as for “Open”. If the lid
does not remain still or an error message appears, the ma-
chine must be shut down immediately! Error messages of the
control system must be heeded!
c)
Check the safety switches as follows:
–
Start the machine.
–
Press the emergency-stop switch.
–
If
the machine has not switched off, it must be shut down im-
mediately!
!!! To shut down the machine, the emergency-stop switch must be
pushed to "Emergency-Stop", the main switch turned to "0" - OFF" and
the power plug pulled from the outlet! Take the Tablet PC from the
bracket and switch it off permanently. Secure the machine against
further use!
