17
COMPILER TECO/ATI
ENDORSED
DATE
14.07.2003
REG. CODE
1-5302-612
MODEL N°
50894
DATE OF ISSUE
07-03
REVISION
00
IX
1
3
2
4
DISASSEMBLY OF THE ENGINE
During repair operations, when
using compressed air, wear eye
protection.
Extracting fuel injectors
Unscrew the fuel feeding pipes.
Remove the injectors using a commercial extractor tool as shown in
fig. 1.
Removing the flywheel
Use the extractor code 00365R0010 as shown in figure 2.
During the demounting phases, pay particular attention to
prevent the flywheel from dropping as this could seriously
injure the operator.
Wear protective goggles when removing the flywheel ring.
IMPORTANT: Do not tap the end of the extractor when
removing the flywheel.
Removing the pulley
The pulley can be removed manually as shown in figure 3.
Extraction of flywheel side main bearing
Withdraw the bearing using two M8 screws taking care to tighten
them evenly; alternatively use a commercial extractor, as shown in
figure 4.
DISASSEMBLY AND REASSEMBLY
Besides disassembly and reassembly operations this chapter also
includes checking and setting specifications, dimensions, repair
and operating instructions. Always use original RUGGERINI spare
parts for repair operations.
