RuggedMade MHP13-20, Руководство пользователя и список запчастей

Страница: 6 / 48

4
Ensure the power pack is positioned safely
；
Check the hydraulic oil in the power pack is suitable for the ambient
temperature.
See section on recommended hydraulic oils
；
Check hoses and machine for damage
；
Check hydraulic level
；
Check operation and cleanliness of couplings
；
Check that any hydraulic tools to be used are compatible with the flow
and pressure available from the power pack. Do not use hydraulic
tools if they require a lower flow than that provided by the power pack,
the resulting over speed could be extremely
dangerous.
；
Check oil level in the engine and that the grade of oil being used is as
recommended for the ambient temperature according to the engine
manufacturers’ handbook
；
Check the condition of the couplings both for cleanliness and damage
；
Connect the hose couplings to the power pack couplings male to
female
；
Start the engine in accordance with the manufacturers’ handbook
；
Allow the engine to warm up for 3 to 4 minutes
；
Move the flow control handle on the power pack from the ‘off’ position
to the ‘on’ position
；
Note that if the hoses and/or the tool are new or have been emptied of
oil prior to use, the level of hydraulic oil in the tank will drop and may
need topping up
；
The tool may now be operated using the controls on the tool. Note
that the
270cc and 390cc
engines fitted to power packs are fitted
with ‘power on demand’ operated throttle controls. This control
speeds up
6. OPERATION