RuggedCom RuggedServer RS400 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 36

RuggedCom RuggedServer RS400 Скачать руководство пользователя страница 2

Copyright

COPYRIGHT © 2009 RuggedCom Inc. ALL RIGHTS RESERVED

Dissemination or reproduction of this document, or evaluation and communication of its
contents, is not authorized except where expressly permitted. Violations are liable for
damages. All rights reserved, particularly for the purposes of patent application or
trademark registration.

This document contains proprietary information, which is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced or
translated to another language without the prior written consent of RuggedCom Inc.

Disclaimer of liability

We have checked the contents of this manual against the hardware and software
described. However, deviations from the description cannot be completely ruled out.

RuggedCom shall not be liable for any errors or omissions contained herein or for
consequential damages in connection with the furnishing, performance, or use of this
material.

The information given in this document is reviewed regularly and any necessary
corrections will be included in subsequent editions. We appreciate any suggested
improvements. We reserve the right to make technical improvements without notice.

Registered Trademarks

RuggedServer™ is a trademark of RuggedCom Inc. RuggedSwitch

®

is a registered

trademark of RuggedCom Inc. Other designations in this manual might be trademarks
whose use by third parties for their own purposes would infringe the rights of the owner.

Contacting RuggedCom

Corporate Headquarters

US Headquarters

Europe Headquarters

RuggedCom Inc.
300 Applewood Cres., Unit 1
Concord, Ontario
Canada, L4K 5C7

Tel:

(905) 856-5288

Fax:

(905) 856-1995

Toll-free: 1 (888) 264-0006

RuggedCom
1930 Harrison St., Suite 209
Hollywood, Florida
USA, 33020

Tel:

(954) 922-7938 x103

Fax:

(954) 922-7984

Toll-free: 1 (888) 264-0006

RuggedCom
Unit 41, Aztec Centre,
Aztec West, Almondsbury, Bristol
United Kingdom BS32 4TD

Tel:

+44 1454 203 404

Fax:

+44 1454 203 403

Email:

[email protected]

Technical Support

Toll Free (North America):

1 (866) 922-7975

International:

+1

(905)

856-5288

Email:

[email protected]

Web:

www.RuggedCom.com

2

RuggedCom

®

RuggedServer™

RS400 Family Installation Guide rev109

«
1
2
3
4
...
»

Содержание RuggedServer RS400





































Отзывы:

Нет отзывов