INSTALLATION GUIDE
DRIVER COIL
CORD PTT
ANTENNA
If using optional Audio Filter, connect
radio and intercom power leads directly
to Audio Filter and NOT to the battery.
AUDIO
FILTER
PO
WER
RRP364-BT
Rugged Radios | www.ruggedradios.com | 888-541-7223
This is a universal wiring diagram. Your exact configuration might vary depending on the system purchased.
HEADSET
connects driver and co-driver
headsets to intercom. Route away from
power and antenna cables.
RADIO
connects to optional radio.
POWER
c/- directly
to 12v battery.
Radio & Intercom Mounting
Both the intercom and radio come with universal
mounting brackets. Vehicle specific mounting
options are sold separately.
DO NOT mount the radio or intercom near an
ignition box to avoid RF interference.
Route antenna cable away from power leads.
•
•
•
Connect Power
Route all power cables directly to the battery.
DO NOT connect inline with other components. If
power is tied to ignition, lights or other power sources,
a ground loop problem may occur, causing noise in the
system.
DO NOT remove any fuses that are in line with factory
cables or otherwise modify power cables.
•
•
•
CREW HEADSETS
connect rear
seat passengers.
UHF-1
VHF-D17
2 VHF DIGITAL
