CardioWall
Outdoor Portrait
–
Section 3 - Installation
© Rugged Interactive
202
1
06
07
08
Once the panels are fixed to the wall, the
centre pod PCB can be screwed in
place
.
Currently, the
centre pod is
secured with a cable tie and p-clip for
transportation
, remove these
and
position
the pod. Screw
into place
before
attaching the network cable and
screwing the
sensor wire to the pod PCB.
The centre graphic panel can now be
fixed into position using a small 5mm
bead (blue route in image) of EvoStick
“Sticks Like Sh
*
t” sealant adhesive.
We would suggest screwing the centre
graphic in place first and then remove
it, apply the sealant before placing the
graphics panel and replacing the
screws as this will make it easier to
locate the panel.
Ensure all fixings are tight and secure.
Install power and test the wall works
as expected.
