CardioWall
Landscape
–
Section 3 - Installation
© Rugged Interactive
2019
Required Tools and Consumables:
▪
A spirit level – to check floor is level before installation and that the CardioWall is level during
installation.
▪
An industrial vacuum cleaner.
▪
A dustpan and brush.
▪
A SDS impact drill.
▪
A cordless drill – with torque adjuster to avoid over-tightening of screws.
▪
A set of No.2 pozi bits.
▪
A set of screwdrivers:
▪
A small electrical-type flat-bladed screwdriver to unclip the CAT5 connectors from the pods.
▪
A tiny flat-bladed screwdriver to adjust the volume on the main hub.
▪
A socket set.
Suggested Extras:
▪
3 m of self-adhesive ‘mini’ box trunking to secure the power cable.
▪
An extension cable in case the power supply is not within 1000 mm of the base of the CardioWall.
(CardioWalls are supplied, unless otherwise requested, with a power adaptor cable that extends 1000
mm from the base of the CardioWall.)
▪
Cleaning cloth and gentle cleaning spray.
Installation Heights:
▪
Mount flat to the ground or raised to a desirable level, depending on primary user group.
Operating Environment:
▪
Keep out of direct sunlight; bright sunlight can affect the LED pod sensors.
▪
Keep indoors and dry.
▪
Optimum ambient temperature: 5°C to 30°C. Avoid extreme fluctuations of temperature.
▪
Area clear in front of the CardioWall: 200 cm minimum.
Other Recommendations:
▪
Instruction / training carried out by an appropriate instructor to all new users.
▪
A waiting / spectating area positioned nearby is advised.
▪
A leaderboard to go with each unit is highly recommended.
IF YOU ARE IN ANY DOUBT, CALL RUGGED INTERACTIVE DIRECTLY ON +44 (0) 1726 833 882
