23
◆
Delete: Delete preset position
Setting steps as follow:
1
）
In menu of Pic.1-3-1
，
move rocker down or up to let cursor points
“NO.” , then move rocker on right to come into the area of input.
Character blink, move rocker down or up to change the data and
move rocker on right to save and exit. No. range is 1 to 128.
2
）
Move rocker down or up to let cursor
points “setting”, then move
rocker on right to come into the area of setting. The screen
displays the state of setting (Pic.1-3-2).Control the dome camera
by keyboard. After setting, press
“close” to save. The screen will
display Pic.1-3-1, cursor
points “setting”, Setting is finish. You can
call
this
position
to
confirm
it
is
saved.
Pic.1-3-2
3
）
Select the No. of preset position before Call preset position
，
move
rocker down or up to let cursor
points “call”, then move rocker on
right to confirm, the camera will adjust to the preset position
（
Note
: If
the No. Of preset position
haven‟t been set. Call this No., the camera
will not adjust.
）
4
）
After all setting
，
move rocker down or up to let cursor points
NO: 001
Setting
Call
Delete
EXIT
PRESS CLOSE TO SAVE
PRESS OPEN TO ESC
