Rugged CCTV ELX8-60, Руководство по установке, Страница: 24 / 69

ELX8 -60 INSTALLATION AND CONNECT ION
24
2003. 08. 13 (v 1.0)
Rugged CCTV
8.2.4. Time Format
(1) Select “Time Format ” using the [ / ] or the [ / ] buttons and press [ENTER].
(2) Two Time Formats are available; ‘MM/DD/YYYY’ and ‘YYYY/MM/DD’. Select a value using [ / ]
buttons , and press the [EXIT] button when finished. (Default value is ‘MM/DD/YYYY’.)
8.2.5. Date
(1) Select “Date” using the [ / ] or the [ / ] buttons and press [ENTER].
(2) Select ‘M M ’/‘DD’/‘YYYY’ using the [ / ] buttons, and select t he value using the [ / ]
buttons .
(3) P ress the [EXIT] button when finished.
8.2.6. Time
(1) Select “Time” using the [ / ] or the [ / ] buttons and press [ENTER].
(2) Select ‘HH’/‘M M ’ using the [ / ] buttons, and select t he value using the [ / ] buttons.
(3) P ress the [EXIT] button when finished.
8.2.7. Apply Date/Time
Most setting values are applied automatically, when exiting from the related menu page. But “Date”
& “Time” settings are not applied automatically because they may critically affect the file system of
the recorded HDD. To apply Date/Time setting s confirm settings with [Apply Date/Time] button.
(1) Select “Apply Date/time” using the [ / ] or the [ / ] buttons and press [ENTER]. A warning
message will appear.
(2) Select “OK” using the [ / ] or the [ / ] buttons and press [ENTER]. To cancel, press the
[EXIT] button.
8.3. Setting Recording Condition
Recording condition s under the “Quick Setup ” menu tab apply the same values to all analog channels 1~8.
All settings are applied for 24 hours /day regardless of the values set for “Time Schedule ” or “Alarm Rec. ”