4
LRBK-FIX
4 Inspection / Repair / Disposal
4.1 Hints for periodical inspections
The operator must determine and specify the nature and scope
of the required tests as well as the periods of repeating tests
by means of a risk assessment (see sections
4.2
and
4.3
).
The continuing suitability of the lashing point must be chek
-
ked at least 1x year by an expert.
Depending on the usage conditions, f.e. frequent usage,
increased wear or corrosion, it might be necessary to check
in shorter periods than one year. The inspection has also to
be carried out after accidents and special incidents.
4.2 Test criteria for the regular visual
inspection by the user
•
Completeness of the lashing point
•
Complete and readable marking of Lashing Capacity as
well as manufacturer sign
•
Deformation at load bearing components like base body
andring.
•
Mechanical damage, like strong notches, especially in
areas where tensile stress occurs.
4.3 Additional test criteria for the
competent person / repair worker
•
Reduction of cross-section due to wear >10 %
•
Evidence of corrosion (pittings)
• Any other damage
•
Further checks may be required, depending on the result
of the risk assessment (e.g. testing for cracks in load-
bearing parts / at weld seam).
4.4 Disposal
Dispose worn out components / attachments or packaging
according to the local waste removal requirements.
