Ruckus Wireless ZoneFlex series, Руководство по установке

Страница: 33 / 68

27
Preparing the 7781CM at the Depot and Shipping to the Field
Operating the CM
6. If you have made any changes on the Security Status page, then click Apply .
If you have selected the Restore Factory Defaults Yes button, then the CM reboots and
resets all CM parameters to the factory defaults.
If you have selected the Restore Factory Defaults No button, then the CM web interface
saves your changes and returns you to the Security Status page.
Viewing the SNMP Event Log
1. Log into to the Status page as described in “Logging Into the CM Web Interface from
the 7781CM Ethernet Port” on page 21 or “Logging Into the CM Web Interface using
a Dynamic IP Address” on page 22.
2. Click Event Log on the menu on the left sidebar. The CM web interface displays the
SNMP Event Log Status page.
3. View the SNMP events in the SNMP event log.
Figure 17. SNMP Event Log Status page
4. If you would like to delete the SNMP events in the SNMP event log, then click Clear
Log .
Continue with “Using SSH to set the ZoneDirector IP Address on the AP” on page 28 or
“Configuring the AP for Management by FlexMaster or for Standalone Operation” on
page 30.