Ruckus Wireless ZoneFlex 7363 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 128

Ruckus Wireless ZoneFlex 7363 Скачать руководство пользователя страница 73

65

Configuring the Access Point

Configuring Wireless Settings

CAUTION:

Selecting the incorrect country or region may result in violation of appli-

cable laws. If you purchased the Access Point in the United States, you do not need
to set the country code manually. Ruckus Wireless devices that are sold in the US are
preconfigured with the correct country code and this setting is non-configurable.

3.

If you are using AeroScout Tags in your organization to locate assets or personnel,
you can use your ZoneFlex AP to relay location or presence data from the
AeroScout Tags to the AeroScout Engine via Wi-Fi.

To enable the AP to relay AeroScout data, click the

Enable

option in

AeroScout-

RFID tag detection

.

To check the status of the AeroScout communication agent (which relays location
data from AeroScout Tags to the AeroScout Engine), go to the

Status > Wireless

page. Refer to

“Viewing Current Wireless Settings”

on

page 99

for more informa-

tion.

NOTE:

For other AeroScout-related configuration, refer to the AeroScout documen-

tation that was shipped with your AeroScout Tag and AeroScout Engine.

NOTE:

If ZoneDirector exists on the network, you can enable AeroScout RFID tag

detection on all its managed APs at once. Refer to the ZoneDirector online help for
more information.

4.

Click

Update Settings

to save your settings.

External Antenna

NOTE: This option only appears if you are using
the ZoneFlex 2942 AP.

The ZoneFlex 2942 AP provides an external
antenna port, in case you want to attach an
external antenna to extend the range of your
wireless network. To enable the AP to use the
external antenna, select the

Enabled

option in

this section. This option is disabled by default.

«
...
71
72
73
74
75
...
»

Содержание ZoneFlex 7363

































































































































Отзывы:

Нет отзывов