manualshive.com logo in svg

Ruckus Wireless ZoneFlex 7363, Руководство пользователя, Страница: 10 / 128

Поделиться
Скачать
Ruckus Wireless ZoneFlex 7363 Скачать руководство пользователя страница 10

2

Introducing the ZoneFlex Access Point

Unpacking the ZoneFlex Access Point

Unpacking the ZoneFlex Access Point

1.

Open the Access Point package, and then carefully remove the contents. 

2.

Return all packing materials to the shipping box, and put the box away in a dry 
location.

3.

Verify that all items listed in 

Package Contents

 below are included in the package. 

Check each item for damage. If any item is damaged or missing, notify your 
authorized Ruckus Wireless sales representative.

Package Contents

A complete Access Point package contains all of the items listed below:

■

ZoneFlex Access Point

■

Software License Agreement/Product Warranty Statement

■

Quick Setup Guide

■

(Ethernet cables, power adapters and mounting kits are optional accessories that 
may or may not be included depending on the SKU purchased)

Getting to Know the Access Point Features

This section identifies the physical features of each ZoneFlex Access Point model that 
is discussed in this guide. Before you begin the installation process, Ruckus Wireless 
recommends that you become familiar with these features.

■

ZoneFlex 2942/7942 Access Point

■

ZoneFlex 7962 Access Point

■

ZoneFlex 7341 Access Point

■

ZoneFlex 7343 Access Point

■

ZoneFlex 7363 Access Point

■

ZoneFlex 7321 Access Point

■

ZoneFlex 7982 Access Point

NOTE:  

This User Guide does not include information on ZoneFlex Outdoor Access 

Points, ZoneFlex 7731 Wireless Bridge, or ZoneFlex 7025 Multimedia Wi-Fi Wall 
Switch. For information on those ZoneFlex models (along with Ruckus Wireless 
MediaFlex and MetroFlex product lines, and FlexMaster server), refer to their respec-
tive documentation available from 

support.ruckuswireless.com

.

Содержание ZoneFlex 7363

































































































































Отзывы:

Нет отзывов