Ruckus Wireless ZoneDirector 1100, Руководство по настройке, Страница: 29 / 30

VIEW Certified Configuration Guide: Ruckus Wireless
721-1004-000-E.docx
August 2014
29
AdminTip: 87-Series (PIVOT) does not support CAC
CAC must not be enabled on an SSID that 87-Series will use to connect. The
feature is scheduled for future implementation.
1 Click Configure> Access Points and click Edit for the AP where CAC is required.
2 Under each of the radios B/G/N 2.4 GHz or A/N 5.0 GHz Call Admission Control check
Override Group Config and select the % of airtime usage limit.
Select 10% for the 8020/8030 handsets and select 20% for the 84-Series handsets. If
both types of handsets are present, use the smaller number.
3 Change the Tx Power if necessary for each radio.
P
lease consult your facility’s RF site survey, designed for voice traffic, to determine if
you have sufficient coverage to support all expected data rates.
The handset requires the following minimum dBm reading
– determined by the AP Tx
power setting and the plan architecture - to support the corresponding data rate in the
access point.
4 Set SpectraLink Compatibility to Disable.
AdminTip: SpectraLink Compatibility not finished
The SpectraLink Compatibility setting is designed to automatically set most of the
cli settings described in this guide. It is not yet finished and will be available in a
future release of Ruckus Zone Director software. Currently, it will compromise
network performance.
802.11
Radio Standard Minimum Available
Signal Strength
(RSSI) Maximum
"Mandatory" Data Rate
802.11b -70 dBm 1 Mb/s
-60 dBm 11 Mb/s
802.11g -63 dBm 6 Mb/s
-47 dBm 54 Mb/s
802.11a -60 dBm 6 Mb/s
-45 dBm 54 Mb/s