Ruckus Wireless ZoneDirector 1100, Руководство по настройке, Страница: 16 / 30

VIEW Certified Configuration Guide: Ruckus Wireless
721-1004-000-E.docx
August 2014
16
The settings must be reconciled between the handsets and the infrastructure. The settings on
other devices such as a PBX or SIP server and network routers, must be taken into
consideration.
To change the settings in the Ruckus controller, use the CLI interface by using the ssh protocol
with the IP address of the controller and using the administrative login.
ruckus#
ruckus# config
ruckus(config)# system
ruckus(config-sys)# qos
ruckus(config-sys-qos)# show
System QoS:
ToS Classification-Voice = 0xE0 0xC0 0xB8
ToS Classification-Video = 0xA0 0x80
ToS Classification-Data = 0
ToS Classification-Background = 0
Tx fail threshold = 50
heuristics inter-packet-gap Video = 0 65
heuristics inter-packet-gap Voice = 15 275
heuristics packet-length Video = 2200 2201
heuristics packet-length Voice = 70 400
heuristics classification Video = 50000
heuristics classification Voice = 600
heuristics no classification Video = 500000
heuristics no classification Voice = 10000
To change default ToS classification, you can use following command:
ruckus(config-sys-qos)# tos classification voice 0xb8
ruckus(config-sys-qos)# tos classification video 0x68
To change the settings in the 8020/8030 handsets:
1 Hold down the End Call and Start Call buttons with the handset powered off.
2 Let go of the End Call button while continuing to hold the Start Call button until the
Admin Menu is displayed.
3 Navigate to Network Config> WLAN Settings> Custom> QoS> Wi-Fi Standard>
DSCP tags .
4 Highlight Voice, press OK .
5 Enter the desired DSCP tag value in decimal.
6 Press OK .
7 Highlight Control, press OK .
8 Enter the desired DSCP tag value in decimal.