Ruckus Wireless MetroFlex MF2201, Руководство пользователя

Страница: 24 / 52

24 MF2201 MetroFlex Wireless Access Gateway User’s Guide 8000003, December 2005
Configuring the MF 2201 Gateway
Configuring the MF 2201 Gateway
This section describes the tasks and screens used to customize the MF 2201 Gateway configuration to run
on your wireless network.
Review the following topics before you change any system configuration settings:
• "Connecting to the MF 2201 Gateway" on page 15
• "Accessing the Web Interface" on page 17.
System Configuration
Table 6, “MF 2201 Gateway Default and User Settings Worksheet,” on page 21 shows the default settings
used to login to the device.
A minimum set of configurations is required to put the MF 2201 Gateway into operational mode. The system
provides the default settings for these configuration items. You should change the default settings where
necessary to match your own wireless network’s configuration, and to protect your privacy.
A system reboot is required for configuration changes to take effect. Follow the following steps to configure
the MF 2201 Gateway:
1. Connect to the MF2201 adapter by following the instructions in "Connecting to the MF 2201 Gateway" on
page 15 .
2. Choose Configuration->System.. The window of Figure 5 appears.
Figure 5— System Configuration