8000003, December 2005
MF2201 MetroFlex Wireless Access Gateway User’s Guide
17
Accessing the Web Interface
You should now be able to find the default SSID “V54” of your MF 2201 Gateway over your wireless
connection:
Accessing the Web Interface
The MF 2201 Gateway provides a Web-based user interface for configuration and monitoring. For
information about using the Ruckus Wireless Web Interface, refer to
Chapter 3:, “Using the Ruckus Wireless
.
1.
To access the Ruckus Wireless Web Interface, launch a Web browser and enter the MF 2201 Gateway’s IP
address. If this is the first time the access point is being configured, enter the default IP address:
192.168.0.254
2.
A logon screen will appear. Use the default logon information:
Username:
admin
Password:
<blank>
After logging in, you will see the main information page. On the information page, there are two panes. The
pane on the left shows major information or configuration points. Each major information or configuration
area has a number of sub-menus. Clicking on the relevant menu will bring the relevant page onto the screen.
The system monitors the activities on the Web user interface. If you do not use the Web interface for more
than five minutes, the system will time out, and you will be logged out automatically. You need to re-log in
to access the interface.
!
CAUTION:—
Any configuration changes will be lost unless you use the
Update
button. It is recommended
that after each configuration screen you modify, you click the
Update
button.
Table 4—Default Wireless Settings
Wireless Feature
Setting
Network Name (SSID)
V54
Security
Disabled
