22
−
Prüfen Sie, ob der beiliegende Filterbeutel eingelegt ist. Falls das
nicht der Fall ist, stecken Sie den Filterbeutel auf die Hülse, siehe
dazu Seite 35.
−
Schließen Sie die Schublade durch Hineinschieben.
−
Schalten Sie das Gerät an der Standby-Taste ein.
= Standby-Taste ein/aus
18
|
Operating Instructions | Rev. 05 | Print
| REF 8013302
01
Standby button
Press this button to activate/deactivate the standby mode
02
Setting for
Increase [+] or decrease [-] the extraction power.
extraction power
The power level is shown in the display.
03
Info menu [ i ]
Through this menu, you can, for example, activate the handpiece
cleaning process or check when the next fi lter change or service is
due. Press and hold the button for 5 seconds to change basic set-
tings, e.g. language.
04
Buttons for saving
Three diff erent combinations of rotational speed, rotation direction
user settings
and extraction power can be saved. The memory is shown in the
display (04.1). [M1] [M2] are needed for the fi lter change.
05
Right-hand/left-hand Sets the rotational direction of the tool.
06
Speed controller
This is used to set the rotational speed in steps of 1000 rpm. The
current speed is shown in the display (06.1). If the speed controller is
removed, all buttons are disabled.
07
Filter bag change
The icon appears as a reminder that a fi lter bag change is due.
08
Foot switch
The icon appears if an optional foot switch is connected.
09
Service
The icon appears as a reminder that a service is due.
10
On/off switch
Switches the device on/off for treatment
5.1 PREPARATIONS FOR OPERATION
— Open the dust fi lter bag drawer by pulling on the hose connector.
— Please check if the supplied fi lter bag has been inserted. If this is not the case, connect
the bag to the sleeve at the end of the tool hose. Please refer to page 35.
— Close the drawer by sliding it in.
— Switch the device on using the standby button.
= Standby button on/off
PRODUCT DESCRIPTION
