8019602 | Instructions for use for RUCK
®
wax warming pot | REV 02 | Revision status 23/10/2020
8019602 | Instructions for use for RUCK
®
wax warming pot | REV 02 | Revision status 23/10/2020
6 |
| 7
Safety notices
SAFETY NOTICES
Do not immerse the wax warming pot in water or use it in an area
where there is a risk of water splashing onto it.
Operation
Prior to cleaning, always unplug the device and use only a small
amount of cleaning agent.
The heating element of the wax warming pot gets very hot. NEVER
move the wax warming pot during operation.
NEVER switch on the wax warming pot if it does not contain wax.
OPERATION
Remove the lid and take out the insert.
Attach the protective ring to the top edge of the wax warming pot.
Fill the insert with a suffi cient amount of wax beads of your choice OR put in a
can of wax instead of the insert.
After ensuring that the electrical power supply specifi cations of 230 V/50 Hz are
fulfi lled, connect the wax warming pot to the power supply and press the On/Off
switch. The red indicator light indicates operation.
Turn the temperature control knob clockwise to the desired heating level, which
depends on the type of wax chosen. The yellow thermostat display remains illu-
minated until the selected temperature level has been reached. The thermostat
automatically turns the heater on and off to maintain the selected temperature.
To increase the temperature level, turn the control knob clockwise; to decrease
it, turn it the other way.
Never put wax DIRECTLY into the heating container – only the insert
may be used to heat wax. Plastic containers also should not be placed
in the heating container.
The user should check the temperature of the wax before each
application!
