VC-400LT/RT+ VDSL2 CO&CPE Router MANUAL Ver.B3
50
7.2.7.2 Client Filtering
To enable Client Filter, click on the “Client Filtering” link in the left navigation bar. A
screen is displayed as shown in
Figure 7.2.7.2.
Figure 7.2.7.2 Client Filter Configuration
The screen contains the following details:
Fields in Client Filter:
Click APPLY to save the information that has been entered.
Click CANCEL to exit from this page without saving the changes.
Field
Description
Enable Client Filter
Enable or disable the Client Filter feature of VDSL2 CO&CPE ROUTER.
Select the check box to enable this option.
IP
Enter the filter IP Address range of the local machines under VDSL2 CO&CPE
ROUTER.
Port
Enter the filter Port number range of the local machines under VDSL2
CO&CPE ROUTER.
Type
Select TCP or UDP to filter the protocol type packets from the local machines.
Enable
Provides more IP Addresses of the WAN interface.