Seite 4 von 7
Tip:
VC-350 Ethernet Extender signal belongs to high frequency radio frequency signal. Considering the cable loss, please
choose better quality connectors.
Master
Slave
Step
Installation Instruction
Step
Installation Instruction
1
Local Network equipment is connected to RJ45
port of Master unit
8
The connection terminal of A line of 2-wire
2
The connection terminal of A line of 2-wire
9
The connection terminal of B line of 2-wire
3
The connection terminal of B line of 2-wire
10
Connect the UTP cable of network equipment to
RJ45 port of slave unit
4
Connect power supply (12VDC) to the power port
11
Connect power supply (12VDC) to the power port
5
Power indicator is always on
12
Power indicator is always on
6
Network data indicator quickly blinks when data
transmission is normal
13
Network data indicator, it quickly blinks when
data transmission is normal
7
Line indicator is on (In one line, the indicator is
always on when powered firstly, indicator is
always flash when powered later)
14
Line indicator quickly blinks (In one line, the
indicator is always on when powered firstly,
indicator is always flash when powered later)
